Marathon Sensors Inc. offers
the Heat Treating and Process & Utility industries a wide variety
of products. Customers look upon Marathon as an important source
of technological expertise and equipment to meet the existing and
future requirements of demanding furnace applications.
Product Line Description:
Carbon Control for Heat Treating:
Carbon Sensors / Probes:
The AACC, Carbonseer, UltraProbe II, and Piccolo probes monitor
heat treat atmosphere oxygen levels and provide the user with a
"carbon potential" or "dewpoint" based on proprietary algorithms.
Instrumentation: The MultiPro,
DualPro, CarbPro, CarbPC, 10Pro and VersaPro instruments control
and monitor all phases of the heat treat process. Extractive
Sensing and Controls: The
Sentinel-ESTM, Sentinel-ESi, Sentinel-FCP provide state-of-the-art
extractive sensing and control allowing older furnaces to be cost-effectively
updated to today's demanding quality standards. .
Are you tired of slow recovery after
probe burn-off, frustrated by thermal-shock failures of probes in
your pit furnaces or angry that your "rebuildable" probe really
can only be rebuilt a single time or doesn't last very long when
it is? At Marathon we know that one tool cannot perform every job.
Some probes work well in pits, others suffer thermal shock failure
between loads. Some use costly components that can be rebuilt time-after-time,
while less expensive probes simply don't last. As a result we offer
carbon probes that are tailored to your specific needs. From the
world renown Advance Atmosphere (AACC) to the rapid-recovery Ultraprobe
II, our probes - like all real tools - are optimized so that they
provide the best solution to your problems because in the real world
one size does not fit all.
Carbonseer
The industry's most popular, work-horse
carbon probe. Alloy protection tube for versatility and ruggedness.
Accepted as an industry standard, around the world.
- Available in multiple insertion
lengths up to 47" (1200mm)
- 1.05" diameter, schd. 40 sheath to eliminate probe sag problems
- no need to periodically rotate the probe in order to prevent failure
- Can be inserted up to 10" inside the furnace - no 4" limit as
found on smaller diameter products
- "Nearly New" rebuild service includes new substrate (sensitive
element) and new thermocouple and is backed by a comprehensive 12-month
warranty
- Can be rebuilt multiple times, not just once as with inferior
probes
- High temp alloy sheath
- "K", "R", and "S" integral thermocouples are available
- Efficient probe burn-off and rapid recovery time
- Probe electrical disconnect allows for simple replacement
- Strain-relief grommet for direct-to-terminal wiring
Magnum Series Carbon Probes
The Toughest, Most Accurate and Longest-lasting Probes Available
Anywhere (2 patents pending)
AACC-Magnum
Based on the acclaimed Advanced
Atmosphere Carbon Controller Substrate, the AACC-Magnum provides
unmatched accuracy and life and is backed by a comprehensive 18-month
Warranty.
- 18-month warranty.
- Full sheath or focused burn-off available.
- Rebuild "kits" allow replacement of only those parts that have
worn out.
- Sheath available in high-temperature alloy or ceramic.
- Machined 6061 head will last virtually forever.
- The most-accurate, longest-lasting substrate available.
- User-rebuildable design Factory refurbished multiple times with
warranty backing.
- 1.05" diameter, schd. 40 sheath to eliminate probe sag problems
- no need to periodically rotate the probe in order to prevent failure.
- Available in a number of standard insertion lengths up to 30"
(765mm).
- "K", "R", and "S" integral thermocouples.
Carbonseer-Magnum
Incorporating a round slipcast
substrate first popularized by the MMI Super Sensor, the Carbonseer-Magnum
provides accuracy and long life and is ideal for batch-style furnaces
that run a wide range of carbon levels.
- 12-Month warrant.
- Full sheath or focused burn-off available.
- Rebuild "kits" allow replacement of only those parts that have
worn out.
- High-temperature alloy sheath Machined 6061 head will last virtually
forever.
- Round slipcast substrate for high-carbon atmospheres User-rebuildable
design.
- Factory refurbished multiple times with warranty backing.
- 1.05" diameter, schd. 40 sheath to eliminate probe sag problems
- no need to periodically rotate the probe in order to prevent failure.
- Available in a number of standard insertion lengths up to 30"
(765mm).
- "K", "R", and "S" integral thermocouples.
Ultraprobe-Magnum
The Ultraprobe-Magnum uses the SIRO substrate which provides the
best resistance to thermal and mechanical shock and the best value
available in carbon probes. Ideal for pits or door areas where large
changes in temperature are common.
- 12-month warranty Full sheath or
focused burn-off available.
- Rebuild "kits" allow replacement of only those parts that have
worn out.
- High-temperature ally sheath Machined 6061 head will last virtually
forever.
- Advanced SIRO substrate withstands thermal shock.
- User-rebuildable design Factory refurbished multiple times with
warranty backing.
- 1.05" diameter, schd. 40 sheath to eliminate probe sag problems
- no need to periodically rotate the probe in order to prevent failure.
- Available in a number of standard insertion lengths up to 30"
(765mm).
- "K", "R", and "S" integral thermocouples.
Advanced Atmosphere (AACC) Carbon
Series
The most accurate, longest-lasting
carbon probe ever built. The optional ceramic sheath, coupled with
more platinum than any other probe on the market, allow this series
of probes to withstand temperatures greater than 1850°F. (1010°C).
- Available in a number of standard
insertion lengths up to 30" (765mm)
- "K", "R", and "S" integral thermocouples.
- First generation general probe burn-off.
- Probe electrical disconnect allows for simple replacement.
- High quality stainless construction allows this probe to be refurbished
multiple times with warranty backing.
- Ceramic sheath available.
- Schd. 40 sheath to eliminate probe sag problems.
Piccolo Probe
A Marathon Sensors exclusive, designed for use with Endothermic
Atmosphere Generators, the Piccolo Probe replace the "probe/reheat
well" combination offered by other vendors. The Piccolo Probe
also allows the sampling of multiple generator retorts. Additionally,
the Piccolo Probe has proved successful in several other processes
(i.e. sintering and annealing), and can use gas rather than
air as a reference gas. |
|
Next
Page
